Position:Home > News

Production process of screen partition

Date:2023/7/7 9:29:15  Times:
1、 The screen partition is professionally produced by Qingyun in Anping, and has always relied on advanced production technology and experience to produce high-quality products. The screen partition is made of galvanized steel plate and stainless steel plate, which avoids problems such as flammability, corrosion, and deformation of wooden partitions in the past. The new type of screen partition has a long service life and can be guaranteed for 20 years under normal use. After powder spraying, it achieves a colorful effect. The biggest advantage is that it is the latest waterproof product and can be soaked in water for a long time without any peeling or rusting on the surface. Its placement can also serve as a cover, and for places where scattered debris is piled up in the home, screens can serve as a cover. If screens are used for spacing, closed screens are generally preferred, and their height should not be lower than the line of sight; If the screen is used for book corners, you can choose a hollowed out screen, which can appear lively and lively. Welcome to order! 2、 Common Types of Screens 3. Articles related to Screens 1. Summarize the characteristics of metal partition screens. Metal partition screens have a common texture, rich colors, durability, and diverse shapes, and can be perfectly combined with glass curtain wall materials and stone curtain wall materials. It is lightweight, as long as it is one-fifth that of marble and one-third that of glass curtain walls, greatly reducing the load on the building structure and foundation, and has low maintenance costs and high cost-effectiveness. Firstly, the treatment process for metal partition screens can be divided into two methods: anodizing and electrostatic spraying. The anodizing film is generally larger than 12mu, and the color is only bronze and white, which is monotonous and has serious drawbacks. The exterior color of each aluminum plate on the hat is different, and many curtain wall panels together make up the overall effect of the curtain wall, which is very ugly. This disadvantage cannot be eliminated, not because of the production process, but because the aluminum plate is not a batch, there are slight differences in chemical composition, and factors such as electrolyte current density during oxidation cannot be completely the same. Therefore, the colors after oxidation are different, and a single appearance may not be obvious if everything is obvious. Therefore, the surface treatment of aluminum curtain walls cannot be anodized. The metal partition screen of curtain wall is generally 2-4mm aluminum alloy plate. When producing the wall plate, the metal plate shall be processed according to the requirements of the Quadratic programming, directly bent, four corners welded into a tight groove, and the back wall plate shall be welded through high pressure. Fix and strengthen the bolts with bolts. After the metal plate is processed, spray fluorocarbon paint. 2. With the continuous improvement of people's decoration concepts, the pursuit of color matching has been maximized. Decorating a house is no longer a monotonous light color. Blindness? The disorderly metal decorative mesh products allow us to decorate the Li Gong room with solemnity and propriety. However, if the color matching is not good, it is also a major taboo in decoration. If the color matching is not good, but it does not have a beautiful effect, it will look very ugly instead. Now let's introduce the color matching techniques of metal mesh curtains in different occasions. The quality of color matching in decoration directly affects the specifications of the room, such as walls, floors, and ceilings